PressCAL Software

PressCAL software is universal and can calibrate all current Scanivalve products, including DSA, DSM & ZOC, RAD & ZOC, E-RAD & ZOC, and DSA3016 modules in an enclosure. It performs three tasks:

• an as-received verification
• a calibration
• a post-calibration validation

A report is generated after the as-received test and post-cal validation.

PressCAL replaces DSA3000FieldCAL, DSA3200FieldCAL, & DSMFieldCAL.

The PressCAL manual can be downloaded from our online library of manuals.

To download a copy of the PressCAL software program, please fill out the form below. Please note that all fields are required.