Plastic
Tubing
Materials:
nylon, Teflon, vinyl, urethane
Tube sizes (I.D.):
. 031 inch (0.79 mm), .040 inch (1.02 mm)
.063 inch (1.59 mm), .125 inch (3.18 mm)
Click
for more details (PDF 80KB)
|
|
Tubing
Clamps CLMP-XXX/NYCLMP-XXX
Clamps Scanivalve’s plastic tubing onto
stainless steel tubulations
Brass and steel pressure clamps available
Click
for more details (PDF 45KB)
|
|
Tubulations
Bulged Stainless Steel tubulations for use
with Scanivalve tubing.
Lengths:
.55 inches up to 8.0 inches
Click
for more details (PDF 40KB)
|
|
Installation Tool PTCTL
PTCTL (Plastic tubing Cutting Tool) cleanly cuts nylon, urethane, vinyl and teflon tubing without distorting the tubing (fits .031 thru .125 inch tubing) |
|
Installation
Tools TPOTL-XXX
TPOTL (Tubing
Push on Tool) pushes tubing
over the steel tubulation bulge.
Click
for more details (PDF 40KB)
|
|
Installation
Tools NCSBTL2&3-XXX
NCSBTL2 &
3 Nylon Screwback Tool for
installing the NYCLMP springclamp over the
steel tubulation bulge.
Click
for more details (PDF 32KB)
|
|
Tube/Pipe
Connectors -TC
Connects small diameter plastic tubing with
larger 1/8 inch and 1/4 inch MPT(male) or
FPT(female) piping.
Click
for more details (PDF 65KB)
|
|
Tube
Adaptors for Compression X-lok Fittings
Tube adaptors reduce 1/8 or 1/4 inch compression
fittings to 1/16 inch or 1/8 inch tubulations.
Hand tighten: leak tight seal without a wrench
Click
for more details (PDF 65KB)
|
|
Tube
Connectors -TC
Tube Connectors come in many designs, sizes
and colors.
Designs:
X,TEE,CROSS, STRAIGHT THRU, REDUCER, and PLUG
Click
for more details (PDF 45KB)
|
|
Round
Pneumatic Connectors
Pneumatic quick disconnects
Tubulation Sizes:
.040 inch up to .125 inches
No. of tubes
per connector: 19 up to 73
Click
for more details (PDF 215KB)
|
|
High
Pressure “L” Connectors 48L
Round connector accepts 48 each .063 inch
steel tubes.
Maximum pressure:
1500 psi
Click
for more details (PDF 70KB)
|
|
Rectangular
Pneumatic Connectors
8,10, or 12 tube rectangular pneumatic quick
disconnects
Click
for more details (PDF 48KB)
|
|
Rectangular
Pattern Connectors RPC
This quick disconnect is panel mounted and
contains stainless steel tubulations on both
sides of the connector.
Different tubulation sizes can be on each
side of the connector.
Pressure channels:
8 up to 144
Click
for more details (PDF 51KB)
|
|
Pneumatic
Manifolds -TC
These manifolds are available in single and
double manifold designs.
Manifold lengths:
3 tubes up to 12 tubes (single). 4 tubes up
to 24 tubes (double)
Click
for more details (PDF 67KB)
|
|
Quick
Couplers -QC
Used where there is a need for changing pressure
“hook-ups” easily.
Threaded and tubulation designs available
Click
for more details (PDF 78KB)
|
|
Special
Pneumatic Connectors
Scanivalve manufactures other connectors not
listed on this website, We have the capability
to also supply special connectors to fit your
requirements. PLEASE CONTACT US FOR DETAILS.
|
Contact
us for details |
Pneumatic
Calibration/Purge Valve
A 3 way 8 channel pneumatic valve (8P-3T)
that can be used in series with individual
pressure transducers. Allows the user to purge
the pressure input lines. It also can manifold
all of the transducers for easy zero and span
calibrations at one time.
Click
for more details (PDF 36KB)
|
|
Pneumatic
Distribution Module
This product incorporates 2 up to 5 pressure
regulators for applying and setting pressures
manually on large pressure measurement systems.
Design:
Panel mount or 19 inch rack mount.
|
|
Pressure
Static Basket
This product provides a well dampened static
reference pressure for calibrations or measurements
of 1 psi and less pressures. It nulls out
the effects of
air conditioning systems, wind, etc.
Click
for more details (PDF 79KB)
|
|
