|
Physical
Measurement Products
Data
Systems - Ethernet/Serial/ARINC
The
data systems below are designed for use with Scanivalve’s
ZOC miniature electrical input modules and ZOC
pressure scanners. They each accept up to 8 ZOCEIM
electrical input modules, or any combination of
pressure scanners. These compact pressure measuring
systems communicate by Ethernet TCP/IP, or
ARINC 429. Data are output in Engineering Units.
LabVIEW drivers and OPC servers are available.
- 625 Hz/channel/second sampling speeds
Products
and Accessories
E-RAD4000 Remote A/D
Pressure Input Channels: 1 up to 8 A/D’s per RADBASE4000.
Application: Lab, wind tunnel, wind engineering
Communication: Ethernet TCP/IP
Click
for more details (PDF 2.47MB)
|
|
DSM3400
Digital Service Module
Pressure Input
Channels: Maximum of 512
Application:
Flight test, lab, wind tunnel
Communication:
Ethernet TCP/IP or ARINC429
Click
for more details
(PDF 930KB)
|
|
DSAENCL4000
19 inch Rack Mount Data System
This enclosure accepts up to 8 each 16 channel
ZOC16EIM Electrical Input Modules. The enclosure
provides power, EU conversion, and Ethernet
interface.
Electrical Input
Channels: 16 up to 128
Click
for more details (PDF
512KB)
|
|
Products
and accessories
RAD
Accessories
RDS3200
Remote Digital Switch
Plug-in module for the RAD4000 data system.
RDS incorporates 8 software controlled switches
that can open or close relays
Click for more details
(PDF 122KB)
|
|
RPM1000
Power Supply
Power supply for RADBASE4000. Power cable is ordered
separately.
Click
for more details
(PDF 31KB)
|
|
MSCP3200
Miniature Solenoid Control Pack
Miniature solenoid valves designed to be used
inside a wind tunnel model or other compact
space.
Click for more details
(PDF 60KB) |
|
Products
and accessories
|
